Mark 7 Power Trim Xpress – Ultimate Reloader

62

Looking for a different way to trim? A faster way to convert .223 to .300 Blackout? The Mark 7 Power Trim Xpress is the answer! 

Disclaimer

Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.

About the Power Trim Xpress

Both Lyman and Mark 7 offer the Power Trim Xpress, a press-mounted electronic case trimmer for progressive, automated, turret and single-stage presses. This time-saving machine also trims and case forms .300 Blackout from .223 brass

From Mark 7

Works on most Progressive, Automated, Turret or Single Station Presses

Our new Power Trim Xpress case trimmer will tackle the toughest commercial trimming jobs yet is priced to fit any reloaders budget. The trimmer features a powerful variable speed DC motor. The motor is often found on industrial CNC equipment, so you know that it is a tough work horse, yet it is also a slim design that takes up minimal room.

The trimmer will speed through standard trim jobs as well as easily handle cartridge conversions such as 223 to 300 Blackout.

The trimmer will accept standard trim dies and is equipped with a vacuum manifold to cleanly evacuate chips. In addition, the trimmer comes with a long-lasting carbide cutter. (Note: some photos show additional items not included with product. Product includes: Trimmer, vacuum manifold, motor, power cord and mounting hardware.)

What’s in the Box

Included is the power supply with variable speeds, vacuum adapter, motor assembly, adapter flange, mounting screws, power cord, and 2-flute ⅜” solid carbide end mill.

It does not come with a trim die or extended shellholder.

Set-Up and Use

I opted to set up the Power Trim Xpress on a Lyman Victory single-stage press.

I secured this on an Inline Fabrication Ultramount on the Ultimate Reloader Bench System and added an extended shellholder and .300 Blackout trim die.

.300 AAC Blackout Trim Die

I sized a few .223 cases to roughly position the die and checked with a Sheridan slotted case gauge to see where the shoulder was at. (Remember, not all .300 Blackout gauges are created equal! Lyman case gauges are also to SAAMI spec.)

Next, I installed the cutter to the motor, the motor to the trim die and connected the power. Before clamping the motor down, I needed to position it appropriately. There is 0.050” drop for each turn of the motor down into the die and I needed to come down 0.156”. I did an initial cut, measured, and adjusted, using calipers as it got closer. (I zeroed the calipers on factory brass.)

I also verified the shoulder bump and trim length with a Hornady headspace comparator and compared it to factory ammunition. The vacuum adapter was the last addition after all was verified. Trimming went smoothly!

Converted and Trimmed Brass

Conclusion

(L to R): Untrimmed unconverted .223, converted .300 Blackout, .300 Blackout factory round

I was primarily concerned with quickly converting .223 to .300 Blackout. The Power Trim Xpress did this wonderfully! It’s also incredibly versatile, compatible with both single-stage and progressive presses.

Get the Gear

The Power Trim Xpress is available directly from Mark 7 Reloading and Lyman.

Also watch Midsouth Shooters Supply

Lyman Pro Trim Dies

Lyman Pro Carbide Trim Dies

Lyman Pro Trim-Die .223 at Midsouth Shooters Supply

Lyman Pro Trim-Die .300 Blackout at Midsouth Shooters Supply

Sheridan Engineering .300 Blackout Gauge

Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!

Thanks,
Gavin Gear

Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here