MDT GRND-POD Bipod – Ultimate Reloader

50

We’ve featured a few different bipods on Ultimate Reloader—today we’re taking a closer look at the MDT GRND-POD.

Disclaimer

Ultimate Reloader LLC / Making with Metal Disclaimer: (by reading this article and/or watching video content you accept these terms). The content on this website (including videos, articles, ammunition reloading data, technical articles, gunsmithing and other information) is for demonstration purposes only. Do not attempt any of the processes or procedures shown or described on this website. All gunsmithing procedures should be carried out by a qualified and licensed gunsmith at their own risk. Do not attempt to repair or modify any firearms based on information on this website. Ultimate Reloader, LLC and Making With Metal can not be held liable for property or personal damage due to viewers/readers of this website performing activities, procedures, techniques, or practices described in whole or part on this website. By accepting these terms, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this website.

About the MDT GRND-POD

MDT has two bipod categories, the GRND-POD and the CKYE-POD.

MDT CKYE POD Triple Pull, CKYE POD Double Pull, GRND-POD

The latter is MDT’s premium lineup intended for PRS shooters.

GRND-POD is a newer, much more affordable option from MDT with some impressive features: 

  • Compact Form-Factor
  • 4.5” to 9” Height Range
  • Single-Handed Adjustments
  • 40° of sideways cant with adjustable tension 
  • Mount Options: ARCA, Picatinny, A.R.M.S. 17
  • Rapid deploy legs
  • 90° (down) and 50° (forward) leg angles
  • Legs also angle backwards and forwards 

It is made of 6061-T6 aluminum core with polymer buttons and carbon legs with rubber feet tips. 

From MDT

The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that we, through your feedback, knew to be most important in a precision rifle bipod.

With an overall design direction and approval for the bipod, we began to dive deeper into specific bipod features, like adjustable leg lengths, cant with adjustable tension, bipod legs that can be deployed both quickly and easily, and of course stability and strength, exploring some new-to-us materials and manufacturing techniques along the way. Determined to incorporate all of these features at a cost that makes sense, we would not stop until we had achieved our project goal.

Bringing you the MDT GRND-POD, a premium quality bipod, without a premium price tag.

Testing

Depress the button on the top of each leg in order to adjust the angle. Pull each rapid deploy leg to adjust the length.

50° Forward Adjustment

To shorten, depress the buttons on the side of each leg. For convenient storage and carry, the legs can be stored parallel to the barrel, either forward or backwards. I prefer forward so the tension lever doesn’t get in the way. A tension lever is critical for me on a bipod for cant adjustments. I am certain to reference either the bubble level on my scope or chassis to see if the gun is level. 

40° of Cant

I first took a 6.5 Creedmoor rifle (in our MDT ACC Chassis) to our 100 yard range to confirm the zero with the help of the Longshot LR-3 system. After making a minor adjustment, we set up one LR-3 camera at 176 yards and another at 336 yards. 

Our first prone set-up was a bit awkward and there wasn’t room for a rear bag even with the full extension. We had better luck with the closer (and lower) target and were able to use a rear bag. 

Conclusion

This lightweight, compact bipod was easy to manipulate and is suitable for a variety of scenarios. It is budget-friendly and sturdy, but not suitable for extreme circumstances due to its limited height. It will work well for most shooters and I’ve even added it to a coyote hunting gun. 

Get the Gear

The MDT GRND-POD comes with an MDT sticker.

Order the MDT GRND-POD directly from MDT.

Don’t miss out on Ultimate Reloader updates, make sure you’re subscribed!

Thanks,
Gavin Gear

Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here